Storage And Drying Parameter Table For E6013 Electrodes

Send Inquiry

Product Introduction

Electrode Status	Storage Requirements	Drying Parameters	Cooling Requirements	Applicable Scenarios
Undampened (new electrodes)	1. Ambient temperature: 15-30℃ 2. Relative humidity: ≤60% 3. Storage method: Sealed moisture-proof packaging, ≥10cm above ground	No drying required	-	Newly purchased electrodes, used within ≤3 months
Slightly damp	Slight packaging damage, no obvious rust/moisture traces on electrode surface	Temperature: 70-90℃, Time: 1h	Cool to room temperature (20-25℃) before use	Occasional humidity exceeding standards (60%-70%) in storage environment
Moderately damp	Small amount of frost-like moisture on surface, no coating cracking	Temperature: 110-130℃, Time: 1.5h	Cool to 50-60℃ then place in insulation cylinder (temperature ≥80℃)	Stored for ＞6 months or severely damaged packaging
Severely damp	Coating cracking/peeling, or rust on electrode surface	Temperature: 140-150℃, Time: 2h	Cool to 50-60℃ then use immediately; no secondary storage	Long-term exposure to high humidity (＞85%)
Special storage	For long-term storage (＞12 months)	Dry at 100℃ for 1h before storage, then seal in vacuum packaging	No re-drying needed if vacuum packaging is intact	Overstocked inventory or cross-season storage

Hot Tags: storage and drying parameter table for e6013 electrodes, China, manufacturers, suppliers, factory, company, wholesale, discount, buy, low price, high quality, products

E6013 Electrodes