Industry News

E71T-1 and E71T-GS are both types of flux-cored welding wires, widely used in various industries such as shipbuilding, construction, and automobile manufacturing. Although the w...

Welding is a vital process in many industries, ranging from construction to manufacturing. It involves the joining of two materials by melting and fusing them together with the ...

First, surfacing welding process Surfacing welding process is a kind of process in which materials with certain mechanical ability are piled on the welded surface of the base ma...

The porosity in welding is a common problem encountered in the semi-automatic welding process of self-protected flux-cored wire. For this reason, we analyze the cause of semi-au...

With the development of laser technology and aluminum alloy development technology, it is particularly important to further carry out basic research on aluminum alloy laser weld...

Measures to improve the fatigue strength of welded structures 1) Reduce the stress concentration of the fatigue crack source in the welded joint and the structure of the stress ...

01 In general welding avoid the use of DC reverse welding method The caloric value of the anode is much higher than that of the cathode in DC tungsten argon arc welding. Therefo...

Differences between TIG welding and MIG welding: TIG welding is non consumable inert gas arc welding, while MAG welding is consumable active gas arc welding. Argon arc welding i...

As a kind of austenitic stainless steel, 304 stainless steel is a stainless steel material with strong versatility, good corrosion resistance, heat resistance, and non-magnetic....

One, the welding wire has a hard bend Cause: The welding wire does not bend hard during production, but it is bumped during the handling process and the welding wire of the weld...

Although aluminum and its alloys have been used to weld into many important products, the actual welding production is not without difficulties. The main problems are: pores in ...

Weldability refers to the ability of homogeneous materials or dissimilar materials to be welded to form complete joints and meet the expected use requirements under the conditio...