In recent years, with the rapid development of new energy technologies, nickel-based electrode materials have become a research hotspot due to their excellent electrochemical properties. This article summarizes a number of scientific research results and sorts out the recommended nickel electrode materials and their advantages in different application scenarios.
I. Nickel-hydrogen battery: high-stability α-type nickel hydroxide electrode
The α-Ni(OH)₂ electrode material (electron transfer number of about 1.3) developed by the Harbin Institute of Technology team shows significant advantages. Compared with traditional β-Ni(OH)₂, it has better mechanical properties, more positive electrode potential, higher charging efficiency, and the interfacial charge transfer impedance is reduced by about 30%. In addition, α-Ni(OH)₂ can reduce the nickel content in the active material by 30%, which has both environmental protection and economic value. The study also found that the stacking fault rate of the material is closely related to the discharge capacity. The stacking fault rate of the high-capacity (270mAh/g) material is 14.9%, which provides a new idea for optimizing electrode design.
II. Supercapacitor: nickel oxide/carbon nanotube composite electrode
The composite material of nickel oxide (NiO) and carbon nanotube (CNT) has outstanding performance in the field of energy storage. The NiO/CNT composite electrode prepared by sol-gel method and electrochemical deposition has a specific capacitance of up to 160F/g, and has both double-layer capacitance and pseudocapacitance characteristics. The specific capacity of NiO single electrode heat-treated at 250°C reaches 240F/g, which is better than traditional activated carbon materials, and the introduction of carbon nanotubes further reduces impedance and broadens the working potential window. The nanostructured nickel-based materials synthesized by hydrothermal method (such as hollow nickel hydroxide microspheres and porous nickel oxide rods) have a specific capacitance of over 1000F/g and excellent cycle stability, which are suitable for new energy vehicle energy storage systems.
III. Zinc-nickel battery: high-density nickel electrode technology
As a green secondary battery, the nickel electrode technology of zinc-nickel batteries continues to improve. Studies have shown that high-density spherical β-Ni(OH)₂ electrodes need to synthesize high electron transfer number active materials to suppress expansion problems. In addition, zinc oxide nanotechnology (such as rod-shaped and spherical nano zinc oxide) significantly improves the cycle stability of zinc electrodes, with a specific capacity of 630mAh/g, which is expected to promote the industrialization of zinc-nickel batteries.
IV. Hydrogen evolution reaction: nickel-based alloys and porous structure electrodes
In the field of hydrogen production by water electrolysis, nickel-based alloys (such as Ni-S, Ni-Sn) and porous nickel electrodes are prepared by electrodeposition, showing low hydrogen evolution overpotential and high catalytic activity. Foamed nickel-based precious metal oxide electrodes further improve the surface area and catalytic efficiency, providing a new solution for the development of clean energy.
V. Frontier exploration: bimetallic compounds and rare earth magnesium nickel-based materials
The pseudocapacitive properties of nickel-cobalt bimetallic hydroxides, sulfides and selenides are significantly better than those of monometallic compounds, and the specific capacity and cycle life are greatly improved. Rare earth-magnesium-nickel-based hydrogen storage alloys (such as AB₃, A₂B₇ type) have become the research focus of the new generation of nickel-hydrogen battery negative electrode materials due to their high discharge capacity and rate performance.
Conclusion
The diversified development of nickel-based electrode materials is promoting the innovation of energy storage and energy conversion technologies. From high-stability α-Ni(OH)₂ to high-performance NiO/CNT composites, from zinc-nickel battery optimization to hydrogen evolution catalytic applications, these achievements have laid a scientific foundation for the high efficiency and greenness of new energy devices. In the future, the progress of nanostructure regulation and composite technology will further unleash the potential of nickel-based materials and help achieve the "dual carbon" goal.





